John Deere Z355R Parts Diagram (2024)

FAQs

How much horsepower does a John Deere Z355R have? ›

The Z355R has a 22 HP V-Twin John Deere branded engine for smooth, powerful performance.

6.5-bu (230-L) Power Flow rear bagger (rear bagger not available for ZTrak Z355E or Z355R)

Finding your model number and serial number is as easy as locating the identification tag on your machine. As seen in the example, the model number will be displayed below the MODEL heading (Example: Z235), and the serial number will be underlined on the top-right corner of the tag (Example: 130002).

Z355R - 48-in. Mower Deck.

Everything from grass clippings and leaves to pine needles and twigs, no problem. Why? Bagging systems are like an outdoor vacuum cleaner and your lawn is like your outdoor carpet. Just put a bagging system on your riding mower and clean up.

After heavy rains or in damp conditions, grass can contain a significant amount of moisture even if it appears dry. Wet grass can result in poor cutting and clumping of clippings. For best results, ensure the grass is dry prior to mowing.

John Deere recommends you check your oil level before each use and change your oil once a season. That's about every 50 hours of use. Changing the oil on your ZTrak™ Riding Mower is simple. Let's go step-by-step and ensure you know how to do it right.

All John Deere mowers with gas engines take 10W30 oil. Any diesel mower engines will take 15W40 oil. You'll need about two quarts of oil every time you do this service. As with any maintenance or repair, we recommend using genuine John Deere parts whenever possible for assured quality.

How much oil does a John Deere push mower hold? ›

Oil catch pan or other container to drain old oil into (bucket, large coffee can, etc.); typical John Deere mowers hold two quarts of oil.

I believe the original question refers to the “R” series John Deere tractors. For example, there is a Deere 6120R tractor. The 6 means it is a medium sized utility tractor. 120 means it has 120 gross horsepower engine. R is the fanciest trim level.

The Method

The first letter following the number indicates the capability and features of the tractor. John Deere currently has four capability levels: D, E, M, and R. The higher in the alphabet the letter is, the more feature-loaded the tractor is.

For example, if you're looking at a 5075M, the first number (5) stands for its size, which would be a smaller utility tractor. Then the three following digits (075) are engine power, so 75 hp. Lastly, the letter M would mean it has a medium feature level. Not as basic as an E, but not quite as advanced as an R.

The Method. Compact utility tractors and utility tractors are named with a combination of four numbers followed by one or two letters. The first number denotes the size and family of the tractor and the next three numbers specify the approximated engine horsepower.